Description
BETA TESTERS WANTED. Please Inquire
Compatibility
- 2025 – 2026 390 Adventure X
2025 390 ADV R – This bike will be getting optional Factory cruise soon and will not be supported.
2025 390 Enduro R – Currently untested / unsupported
Triple Switch
A 3 button switch for controlling the cruise functions is included. Fully watertight and durable. Mounts directly to standard 22mm handlebars with a fully opening bracket. Increase and Decrease speed by 3kph with each press (configurable). This option provides 3 buttons:
- Resume / Increase
- Cancel
- SET/ Decrease
LED lights and other upgrade compatibility
This kit is 100% compatible with any aftermarket lights and kits. No wire splicing or messing with brake wires.
Cruise Stop Conditions
We know it’s paramount on motorbikes to quickly kill the cruise control in as many situations as possible. Our module will disengage cruise control for any one of the following conditions
- Engine RPM signal falls below 1000 or above defined max
- Front brake lever**
- Clutch lever is pulled
- Bike transmission is in first gear or neutral
- Any one of the required CANBUS packets are not updated within 1000 milliseconds
- A difference of 10% between the front and rear wheel speed
Configurability
The module has a weather tight USB-C connector for changing various settings such as speed increment size, PID gain, and throttle limits.
Diagnostic Port
This kit uses the diagnostic port of your bike. If you want a second port for OBD and Off Road dongles, see addon section.
Install Difficulty
To install this kit you must remove the tank and split the headlight housing. About 2 hours install time with proper tools. T-harness will override the throttle signals and diagnostic connector will collect important speed data.
Manual / Install
Click here for PDF Installation manual
Customer Videos
brett.a.hewlett –
I installed the veridan cruise control kit on my 2026 390 adventure x by myself. I didn’t have to touch my fuel tank to successfully install the kit. I plugged into the front light area and then ran it through the right side where the turning signal plugs are (housed the blinking control unit in there) and then ran it beside the other wires to the red plug. Then ran the one line to the brake light to T tap it in. Past the first initial test indicating that the kit is installed successfully. The time it took me to take off necessary side plastic fairings, the light, the turn signal compartment and to plug everything in to putting everything back together was about 3 and a half hours maybe 4. I took my time the whole time. I’ve never taken anything off a motorcycle in general in my lif, let alone install something like this or anything in general. I’m new to motorcycles, so if I can do it.. So can you. Lol cruise control works flawlessly and a very nice addition to the new bike. Next up is the fuel lite 😊. Safe riding out there!